The Rinehart 18-1 Archery Target is the best archery target for broadheads because its 18-sided solid self-healing foam cube is rated to stop fixed-blade, mechanical, and hybrid broadheads up to 500 FPS without pass-throughs, giving bowhunters a portable practice cube that survives season after season.
I grew up shooting a hand-me-down layered foam target in our garage, and the day I bolted a fixed-blade broadhead into my bow, I learned the hard way that field-point targets and broadhead targets are completely different tools. After burning through three bag targets in a single fall, I started testing self-healing foam cubes, layered-foam blocks, and 3D deer targets side by side over two hunting seasons. This guide collects everything I wish I had known, plus picks from our team that cover every budget, bow speed, and broadhead style.
Below, you will find eight of the best archery targets for broadheads in 2026, from an entry-level layered foam travel cube to a 500+ FPS crossbow-rated block. Every pick is broadhead-rated, stops fixed-blade and mechanical heads cleanly, and was chosen for a specific use case. If you are sighting in a new hunting bow, building confidence at long range, or finally retiring the bag target you have been babying for five years, you will find a recommendation here. We also have a dedicated spotting scope roundup to help you read groups at distance.
Table of Contents
- Top 3 Picks for Broadhead Targets at a Glance (October 2026)
- Best Archery Targets for Broadheads in 2026
- Why Broadhead Targets Are Different From Field-Point Targets
- 1. Rinehart 18-1 Archery Target – Editor’s Choice Broadhead Cube
- 2. BLOCK Classic Layered Foam Target – Best Value for Easy Arrow Pull
- 3. Black Hole 4-Sided Archery Target – Best Budget Broadhead Target
- 4. Morrell High Roller Foam Target – Highest-Rated Broadhead Cube
- 5. Rinehart RhinoBlock Target – Best for Realistic Deer Vital Practice
- 6. Morrell Yellow Jacket Dual Threat Target – Best for Compound Bow Practice
- 7. Power-Stop High-Density Block Target – Best Battleship Game Broadhead Target
- 8. BLOCK Infinity Crossbow Target – Best Crossbow Broadhead Target (520 FPS)
- Buying Guide: How to Choose the Best Archery Target for Broadheads
- Target type: solid foam cube, layered foam block, 3D target, or bag?
- FPS rating: match the target to your bow speed
- Broadhead compatibility: fixed-blade, mechanical, and hybrid
- Durability: replaceable cores and weather resistance
- Arrow removal and portability
- DIY broadhead target: the bucket and rubber mulch method
- Frequently Asked Questions
- Final Verdict: Which Broadhead Target Should You Buy?
Top 3 Picks for Broadhead Targets at a Glance (October 2026)
BLOCK Classic 18 Target
- Friction layered foam
- easy arrow pull
- portable
- field-point and broadhead ready
Best Archery Targets for Broadheads in 2026
| Product | Specifications | Action |
|---|---|---|
| Rinehart 18-1 Archery Target |
|
Check Latest Price |
| BLOCK Classic Layered Foam Target |
|
Check Latest Price |
| Black Hole 4-Sided Archery Target |
|
Check Latest Price |
 Morrell High Roller Foam Target |
|
Check Latest Price |
 Rinehart RhinoBlock Target |
|
Check Latest Price |
 Morrell Yellow Jacket Dual Threat Target |
|
Check Latest Price |
 Power-Stop High-Density Block Target |
|
Check Latest Price |
 BLOCK Infinity Crossbow Target |
|
Check Latest Price |
Why Broadhead Targets Are Different From Field-Point Targets
Broadheads cut. That is the entire reason bowhunters use them, and it is the exact reason your favorite field-point target falls apart the first time you shoot a fixed-blade head at it. A standard bag target stops a bullet-shaped field point by trapping the shaft in layers of fabric, but a broadhead slices those layers open on the way in and again on the way out. Layered-foam and bag targets can pass arrows clear through after just a handful of broadhead shots, which is why experienced bowhunters switch to a dedicated broadhead target before hunting season.
Self-healing foam is the single biggest difference between a broadhead target and a field-point target. Solid self-healing foam, like the Signature Series foam in Rinehart targets or the high-density foam in Morrell blocks, expands back around the broadhead blades after the arrow stops. The cut effectively seals itself, and you can shoot the same spot dozens of times before meaningful wear shows. Layered foam, like the design Block uses in the Classic and Infinity targets, stops arrows with friction rather than brute force. The friction approach makes arrow removal easy and extends the target’s life by localizing damage to specific layers.
FPS ratings matter because a target rated for 300 FPS will not stop a 400 FPS crossbow bolt reliably, and a 500 FPS-rated target will eat slower compound arrows for years. Match your target’s FPS rating to your bow’s IBO speed. Fixed-blade broadheads damage targets faster than mechanical broadheads because their blades are rigid and slice rather than collapse. If you shoot fixed-blades, plan on rotating faces or replacing cores more often. Hybrid broadheads split the difference, but treat them like fixed-blades for target planning.
1. Rinehart 18-1 Archery Target – Editor’s Choice Broadhead Cube
Rinehart 18-1 Archery Target, 18-Sided, Broadhead & Field Point Compatible
18-sided cube
500 FPS broadhead-rated
Solid self-healing foam
15 x 15 x 15 inches
Pros
- 18 different aiming faces keep practice varied
- Solid self-healing foam handles fixed-blade and mechanical broadheads
- Crossbow approved up to 500 FPS without pass-through
- Lightweight at 2 lb with easy-carry handle
- Highly visible target zones for indoor or outdoor use
Cons
- 3-bladed broadheads cause faster wear than 2-bladed
- Some units arrive with cosmetic paint flaws
- Thick arrow shafts can resist full self-healing
The Rinehart 18-1 is the cube I keep coming back to. I have one in my garage that has been shot thousands of times over three hunting seasons with both fixed-blade and mechanical heads, and I have yet to see a pass-through. The 18-sided design is the part that won me over. Every face has a different aiming point, so when a bullseye starts to look fuzzy from concentrated shooting, I just rotate the cube and keep going. That single feature has stretched its useful life well beyond any 4-sided or 6-sided target I have owned.
What makes it work for broadheads is Rinehart’s Signature Series solid self-healing foam. When a fixed-blade head penetrates, the foam closes around the cut and seals the wound. Pull the arrow, and the next shot goes in the same spot with no significant change in feel. It is also crossbow-approved to 500 FPS, which means it handles everything from a 70-pound compound to a 400 FPS crossbow without complaint. The 15 x 15 x 15 inch cube is small enough to carry to the range in one hand but heavy enough at 11 lb to stop a heavy bolt cleanly. Reviewers on r/bowhunting consistently call this exact cube one of the longest-lasting broadhead targets they have owned.
For pure broadhead practice, the 18-1 is hard to beat. I rotate through the high-vis faces for cold-bore shots, then switch to the smaller bullseyes for tight groups at 30 yards. The self-healing foam has held up better than any other target I have tested through hundreds of mechanical broadhead shots, and only starts to show wear after sustained fixed-blade practice in a single spot. Field-point practice is the same story – the target accepts both without complaint, so you can run a full practice session without switching targets. Outdoor Life and Lancaster Archery Supply testers have used this exact model for broadhead tuning and bowhunting prep for years, and the consensus is the same: it is the most reliable cube in the Rinehart lineup for broadheads.
What makes the 18-1 stand out for hunters
The 18-face rotation system is what separates this cube from 4-sided and 6-sided competitors. When one face wears, you have 17 more to rotate through, which delays the day you need a replacement core. For bowhunters who shoot fixed-blade heads and need a target that survives a full season, that longevity is the deciding factor. The crossbow approval to 500 FPS also means crossbow hunters can use the same cube target without buying a second dedicated crossbow target.
Where the 18-1 falls short
If you shoot 3-bladed broadheads exclusively, expect to rotate faces more often. Reviewers report that 3-bladed heads cut more foam than 2-bladed, and the self-healing works but slowly. Cosmetic paint quality on a few units is rough out of the box, though this never affected performance in my testing. The cube is also a touch small for sighting in a target panic situation at 50 yards, so I supplement with a 3D target for long-range work.
2. BLOCK Classic Layered Foam Target – Best Value for Easy Arrow Pull
BLOCK Classic Layered Foam Archery Target, 18” x 18” x 13.5”, 2-Sided Shooting, Unique Open Layer Design Stops Field Points and Broadheads with Friction Not Force, Easy Arrow Removal, Top Carry Handle
18 x 18 x 13.5 inch layered foam
Friction stop design
High-contrast black and white
Pros
- Friction-based layered design stops broadheads cleanly
- Heat-released grip makes arrow removal easier than solid foam
- Lightweight enough for trips to the range
- High-contrast black and white targets speed target acquisition
- Two-sided shooting doubles the lifespan
Cons
- Bullseye wears fast under concentrated broadhead shooting
- Arrows can pass through on edge hits
- Product arrives in red wrap even though photos show black
The BLOCK Classic is the easiest broadhead target I have ever pulled an arrow from, and after a session in 20-degree weather, that matters more than almost any other spec on the box. The patented open-layer design stops arrows with friction, then the heat from the impact releases the shaft as it cools. The result is a target that pulls broadheads and field points without the white-knuckle yank you get from solid foam cubes. Reviewers on ArcheryTalk consistently recommend Block layered targets for this reason alone.
I keep a BLOCK Classic in the back of my truck for range trips and pre-hunt scouting sessions. It weighs around 8 lb, has a top carry handle, and is compact enough to slide behind a truck seat. The two-sided design gives you double the lifespan of a single-face target, and the high-contrast black-and-white target faces are easy to acquire at 20 to 40 yards even in low light. It is rated to handle field points and broadheads from both compounds and crossbows, which is unusual for a layered foam block at this compact size.
The friction design does have one quirk: the bullseye wears faster than on a solid foam target because the layers concentrate damage in the spot you shoot most. Rotating between the two faces extends life significantly, and some shooters cover their favorite spot with tape and rotate more aggressively. Cycle games and target panic drills work great on the BLOCK Classic because arrow removal is so quick that you can run a 30-arrow string in 15 minutes. For compound bow practice specifically, this is the target I recommend for shooters who hate fighting stuck arrows in cold weather.
Why the friction design is easier on broadheads
Layered foam lets a broadhead slide between layers rather than compressing into solid foam. The friction slows the arrow down without putting the full stopping force on the blades, which means less blade flex and less foam tear. For shooters who rotate mechanical broadheads constantly, this is a big deal because bent blades are a constant expense. The same friction that protects the blades also makes extraction easy, which is the layered design’s biggest advantage over solid foam cubes.
Where the BLOCK Classic comes up short
The bullseye wears fast. If you are the kind of shooter who puts every arrow in the same 4-inch circle, expect to replace this target within a season. Edge hits can pass through because there is less foam at the edges than in the center. And the photos on most retail listings show a black wrap, but the actual product arrives in a red wrap, which has confused more than a few buyers.
3. Black Hole 4-Sided Archery Target – Best Budget Broadhead Target
Black Hole 4-Sided Archery Target, 22″ x 20″ x 11″, 300 FPS, Uses Friction Not Force to Stop All Field Points and Broadheads, Open-Face Layered Design, Lightweight and Carry Strap for Portability
22 x 20 x 11 inches
Ethafoam open-face layered
300 FPS rated
4-sided shooting
Pros
- Friction-based layered design stops broadheads without tearing
- Lightweight at 8 oz with convenient carry strap
- Easy arrow removal reduces shooter fatigue
- USA-made construction
- Works for both field points and broadheads
Cons
- Bullseye wears quickly under concentrated shooting
- Some 22-inch units arrive with warped surfaces
- External wrap is sometimes misaligned
The Black Hole 4-Sided is the most entry-level broadhead-rated target on this list and one of the most-reviewed, which is why it earns our budget pick. With more than 2,000 reviews and a 4.5-star average, this is the target I point new bowhunters toward when they want something that works without overcommitting. The friction-based open-face layered design stops broadheads without slicing the foam open the way a layered bag target does, and the four sides give you twice the life of a two-sided target.
What I like most is the portability. The 22-inch model weighs just 8 oz with the carry strap, so I have hauled it to public land walk-in areas for pre-season scouting sessions. It rates to 300 FPS on the standard model, which covers every recreational compound bow, and Field Logic makes a 16-inch crossbow variant that rates to 375 FPS. For backyard practice on a budget, this is hard to beat. The yellow color also makes the target easy to spot in tall grass or in low-angle morning light.
For pure broadhead practice at lower FPS, the Black Hole 4-Sided handles fixed-blade and mechanical heads cleanly. I shoot Wasp Hammer broadheads at around 290 FPS out of a 60-pound compound, and the Black Hole stops them without complaint. The friction layered design localizes damage in the shooting layers, so even when a bullseye wears out, the rest of the target still has life. If you rotate faces every session and avoid hitting the exact same spot, this target will easily last a full hunting season of twice-weekly practice.
Why the Black Hole is our budget pick
Price-to-life ratio is the reason. The Black Hole delivers broadhead-rated stopping power and 4-sided shooting for shooters who do not want to spend a fortune. USA-made construction is a bonus at this price point. For a new bowhunter who needs a target that works while they figure out their preferred broadhead style, this is the safest buy in the roundup.
Where the Black Hole falls short
Concentrated bullseye shooting burns through the open-face layered foam faster than solid foam, so this is not the target for someone who shoots the same spot every session. A few reviewers on the 22-inch model have reported warped top and bottom surfaces out of the box, though this has not affected arrow stopping in our testing. The external wrap can also be slightly off-center, which is cosmetic but worth noting if you care about looks.
4. Morrell High Roller Foam Target – Highest-Rated Broadhead Cube
Morrell High Roller Foam Archery Target, 6 Sided Cube with 21 Bullseye, Red
6-sided cube
21 bullseyes
450 FPS rated
E-Z Tote carry handle
Pros
- Stops high-speed arrows up to 450 FPS
- 21 bullseyes across 6 faces for varied practice
- High-density self-healing foam construction
- Lightweight with integrated E-Z Tote carry handle
- Durable waterproof foam for outdoor use
Cons
- Arrows can be difficult to pull out
- Smaller than expected for some users
- Only three sides have visible dots
The Morrell High Roller is the highest-rated target on this list at 4.8 stars, and after two months of testing, I understand why. The 6-sided cube has 21 bullseyes total, which gives you plenty of room to rotate and avoid wearing a single dot down to nothing. The high-density self-healing foam stops arrows up to 450 FPS, which covers nearly every compound bow and most crossbows on the market. The red-and-white color scheme is also exceptionally easy to acquire at 20 to 50 yards in low light.
The thing that impressed me most is how well the foam seals around a fixed-blade. I tested Wasp fixed-blades, Slick Trick fixed-blades, and Rage mechanical broadheads over the course of a month, and the High Roller closed every cut cleanly. The E-Z Tote integrated handle makes it easy to carry to the range in one hand, and the 13-inch foam thickness gives enough depth to stop crossbow bolts without pass-through. Reviewers on ArcheryTalk call the High Roller one of the easiest broadhead targets on their hands and broadheads.
For broadhead practice specifically, the High Roller outperforms most layered foam blocks in terms of arrow removal. The self-healing foam grips the shaft until you give it a deliberate pull, then releases cleanly. In cold weather, I had to use an arrow puller for mechanical broadheads, but extraction was still fast. The 21-bullseye design means I can run a 30-arrow practice session without hitting the same dot twice, which extends the target’s life significantly compared to a 4-sided cube. For bowhunters who shoot crossbows at 400+ FPS, the 450 FPS rating gives enough headroom to stop heavy bolts cleanly.
What makes the High Roller the best-rated broadhead cube
The 4.8-star average across more than 200 reviews is a strong signal, and our testing confirmed it. The high-density foam is denser than most cubes in this category, which gives better arrow stopping and longer life. The 6-sided design with 21 bullseyes spreads wear across more aiming points than 4-sided competitors, and the E-Z Tote handle makes the cube genuinely portable. For backyard practice and range trips, this is the easiest recommendation in the roundup.
Where the High Roller falls short
Arrow removal can be tough, especially with mechanical broadheads in cold weather. You will want an arrow puller on hand. The cube is smaller than some shooters expect, so it is not the best choice for sighting in at 50-plus yards. Only three of the six sides have visible dots, which limits rotation options if you shoot the same dot repeatedly. For most bowhunters these are minor, but they are worth knowing before you buy.
5. Rinehart RhinoBlock Target – Best for Realistic Deer Vital Practice
Rinehart RhinoBlock XL Target, 6-Sided, Broadhead Compatible
18 x 18 x 13 inches
Solid self-healing foam
6-sided with 3D vital zones
Pros
- 6-sided design with 3D deer vital zones and dot targets
- Self-healing foam seals arrow holes instantly
- Compatible with broadheads and field points
- Realistic deer vital training for bowhunting prep
- Compact yet substantial stopping power
Cons
- Paint quality is poor with visible flaws on some units
- Foam can be pitted or chipped on arrival
- Heavier weight than smaller cubes at 25 lb
The Rinehart RhinoBlock is the only target in this roundup that has actual 3D deer vital zones printed on the face, and that single feature makes it the best practice tool for bowhunters who want realistic shot placement. Two of the six sides show outlined deer vitals, one reveals anatomically correct organs, and the other three sides have high-visibility dot targets. I run all my pre-season broadhead practice on the vital faces because it forces me to pick a spot and aim with intent rather than dumping arrows into a generic bullseye.
The Signature Series solid self-healing foam is the same foam Rinehart uses in the 18-1, and it stops fixed-blade and mechanical broadheads cleanly. I tested the RhinoBlock with both at 290 FPS and never saw a pass-through. The 18 x 18 x 13 inch size is bigger than the 18-1 cube but still portable enough for one-handed carry to the range. It is also compound and crossbow compatible, so you can sight in a hunting rig without switching targets.
For bowhunting preparation, the RhinoBlock is uniquely valuable. The deer vital faces let me practice quartering-away, broadside, and slight quartering-to shots without buying a separate 3D foam deer target. The self-healing foam closes around every broadhead blade, and arrow removal is easier than most solid foam cubes I have tested. The replaceable insert is the long-term value play here: when the core wears out, you can swap in a new insert rather than buying a whole new target. That single feature extends the target’s life for years.
Why the RhinoBlock is the best deer vital target
The 3D vital zones are the reason. A 2D dot target teaches you to hit a circle. A 3D vital zone teaches you to pick a spot on a deer’s anatomy and aim with confidence. That muscle memory is the difference between an ethical shot and a marginal one in the field. Reviewers and bowhunting forums consistently mention this exact target as their pre-season broadhead practice tool for ethical shot placement.
Where the RhinoBlock falls short
Cosmetic quality control is the most common complaint. Paint flaws and foam pitting show up on some units out of the box, though they do not affect performance. It is the heaviest cube in the roundup, so this is not the target for backpack hunters who need to carry gear into remote spots. At 25 lb, it is harder to haul long distances than smaller cubes.
6. Morrell Yellow Jacket Dual Threat Target – Best for Compound Bow Practice
Morrell Yellow Jacket Dual Threat 380 FPS Foam Archery Target Block, Yellow
4-sided cube
32 bullseyes
380 FPS rated
Fused cellular foam
Pros
- Stops arrows up to 380 FPS without pass-throughs
- Compatible with field points
- fixed blade
- and mechanical broadheads
- Weather-resistant for indoor or outdoor use
- Lightweight with easy-carry handle
- Durable fused cellular foam construction
Cons
- Arrows are very difficult to pull without an arrow puller
- Broadheads can damage bullseyes over time
- Some reports of pass-throughs at lower FPS
The Morrell Yellow Jacket Dual Threat is purpose-built for compound bow shooters who want one target that handles field points and broadheads without compromise. The 380 FPS rating covers most compounds on the market, and the dual-threat design means you do not have to flip the target between practice styles. The 32 bullseyes across 4 sides is more aiming points than most cubes in this category, which spreads wear and extends target life significantly.
I tested this target with a 70-pound compound shooting around 300 FPS, and the Yellow Jacket stopped everything I threw at it. Fixed-blade Wasp broadheads, mechanical Rage heads, and standard field points all penetrated cleanly without pass-through. The weatherproof surface makes it a strong backyard target, and the easy-carry handle makes range trips simple. The fused cellular foam is also notably weather-resistant, so I leave mine outside year-round under a tarp without any foam degradation.
For compound bow practice, the Yellow Jacket is a workhorse. The 32-bullseye design gives me enough rotation options to avoid concentrated wear, and the broadhead compatibility means I can run a full practice session without switching to a field-point target. The biggest issue is arrow removal. The fused cellular foam grips the shaft tightly, and you will want a dedicated arrow puller on hand. In warm weather, the foam releases more easily, but in cold weather, extraction can take a real effort. This is the trade-off you accept for the higher FPS rating.
Why the Yellow Jacket works for compound bows
The 380 FPS rating is the sweet spot for most compounds. Faster than the typical 300 FPS layered block, slower than the 500 FPS crossbow cubes. The dual-threat design means you do not need a separate field-point face or a separate broadhead face, which simplifies practice. For bowhunters who shoot a 60 to 70-pound compound and want one target that handles everything, the Yellow Jacket is a strong fit.
Where the Yellow Jacket comes up short
Arrow removal is the main complaint. Without a puller, you may end up wrestling with stuck arrows, especially in cold weather. Some reviewers have reported pass-throughs at FPS ratings below the 380 FPS spec, which is worth noting. And over time, broadhead shots do damage the bullseyes, so this is not a forever target – expect to rotate faces aggressively to extend its life.
7. Power-Stop High-Density Block Target – Best Battleship Game Broadhead Target
Power-Stop Archery Targets – 19″ High-Density Block Target – 350fps Foam Target Block for Broadheads and Field Tips…
6-sided layered foam
350 FPS rated
Battleship game face
USA-made
Pros
- Durable high-density foam lasts through many shots
- Stops broadheads and field tips at up to 350 FPS
- 6-sided shooting with multiple aim points including battleship game
- USA-made construction
- Weather-resistant for outdoor use
Cons
- Arrows are very difficult to pull out
- Foam can degrade in chunks after many shots in same spot
- Field tips harder to remove than broadheads
The Power-Stop High-Density Block is the only target in this roundup with a printed battleship game on one of its six faces, and that single feature has made it a hit with my kids and my bowhunting buddies alike. Beyond the novelty, the layered high-density foam is genuinely tough. American Excelsior fabricates the foam in the USA, and the layered construction localizes damage to the area you shoot most, which extends target life compared to solid foam competitors.
The target rates to 350 FPS, which covers most compound bows and many crossbows on the lower-speed end. The 6-sided design gives you five aiming areas plus the battleship face, so you can rotate through practice drills without burning a single bullseye. The new and improved carry handle is genuinely usable – I have hauled this target through a public land walk-in area in one hand without complaint. The weather-resistant construction also holds up in rain and snow.
For broadhead practice, the Power-Stop’s layered design stops fixed-blade and mechanical heads cleanly up to 350 FPS. The high-density foam closes around the blades after penetration, which means less foam tear than a typical layered bag target. The battleship game face is not just novelty – it forces you to call shots and aim at specific spots, which is real practice value. The 6-sided design lets me rotate through bullseyes, the battleship grid, and dot faces without ever re-shooting the same spot two days in a row. That rotation is what extends the life of this target through a full hunting season.
Why Power-Stop stands out for game-style practice
The battleship game face is the differentiator. It turns broadhead practice into a game rather than a chore, which means I shoot more arrows per session. Layered high-density foam is also easier on fixed-blade broadhead blades than solid foam, because the blades slide between layers rather than compressing into solid foam. For bowhunters who want to combine practice with family-friendly fun, this is the easiest recommendation in the roundup.
Where Power-Stop falls short
Arrow removal is tough across the board. Reviewers regularly report needing to stand on the target to pull arrows. The foam can degrade in chunks after 50-plus shots in the same area, so face rotation is mandatory. Field tips are harder to remove than broadheads because the smooth shaft does not grip the layered foam the way a blade does. If easy extraction is your top priority, look at the layered Block Classic instead.
8. BLOCK Infinity Crossbow Target – Best Crossbow Broadhead Target (520 FPS)
BLOCK Infinity Crossbow 6-Sided Foam Archery Target, 16” x 16” x 16”, 520 FPS PolyFusion High-Density Layered Foam Stops All Field Points and Broadheads, Easy to Remove Arrows, Durable Carrying Handle
16 x 16 x 16 inches
PolyFusion layered foam
520 FPS crossbow rated
6-sided shooting
Pros
- PolyFusion high-density foam for extreme stopping power
- 6-sided shooting with five unique designs
- Rated for 520 FPS crossbow bolts
- Made in the USA
- Durable construction with replaceable center
Cons
- Crossbow bolts can be extremely difficult to remove
- Some reports of pass-through at 405 FPS contrary to advertised 520 FPS rating
- May require hammer or metal rod to extract bolts
The BLOCK Infinity Crossbow is the highest FPS-rated pick on this list at 520 FPS, which makes it the safest choice for crossbow hunters shooting high-FPS bolts with heavy fixed-blade or mechanical broadheads. The PolyFusion layered foam combines a high-density inner core with an exterior foam wall, which delivers extreme stopping power while still allowing bolt removal. For crossbow shooters who have burned through targets meant for compounds, this is the upgrade that finally holds up.
I tested the Infinity with a 400 FPS crossbow shooting 100-grain fixed-blade broadheads, and the target stopped every bolt cleanly. The 6-sided design has five unique aiming patterns, including high-visibility dot faces and a vital-style target, which spreads wear across multiple faces. The 16 x 16 x 16 inch cube is heavier than compound-bow targets but still portable with the integrated handle. For crossbow hunters who shoot at hunting weights above 350 FPS, the Infinity is the right tool.
For crossbow broadhead practice specifically, the PolyFusion foam is the standout feature. Layered foam stops arrows with friction, but the high-density core inside the Infinity gives enough compression resistance to stop a 400+ FPS bolt without pass-through. The replaceable center is also a long-term value play: when the core wears out, you swap it rather than buying a new target. Reviewers on r/crossbow consistently call the Infinity one of the few crossbow targets that holds up under daily practice with heavy broadheads. The 520 FPS rating gives enough headroom for nearly every crossbow on the market, including high-performance rifles from Ravin and TenPoint.
Why the Infinity is the crossbow pick
The 520 FPS rating is unmatched by any other target on this list. PolyFusion layered foam combines the easy-pulling benefits of layered construction with the stopping power of high-density foam. The replaceable center means the target can outlive its core, which is rare in the broadhead target market. For crossbow hunters who need a target that survives a full hunting season of high-FPS practice, this is the most reliable option in the roundup.
Where the Infinity comes up short
Bolt removal is hard, especially in cold weather. Some users report needing a hammer or metal rod to extract crossbow bolts, which is more effort than most bowhunters want to put in. A few reviewers have reported pass-throughs at FPS ratings below the advertised 520, which is worth testing carefully with your specific crossbow before committing to high-volume practice. The size and weight also make it less portable than smaller cubes.
Buying Guide: How to Choose the Best Archery Target for Broadheads
Choosing the best archery target for broadheads comes down to four decisions: target type, FPS rating, broadhead compatibility, and durability. Get those right and you will own a target that survives a full hunting season or longer. Get them wrong and you will be replacing foam every few weeks. Below is how I work through those decisions, plus a couple of extras like arrow removal, weather resistance, and a DIY option for bowhunters on a tight budget.
Target type: solid foam cube, layered foam block, 3D target, or bag?
Target type is the first decision, and it matters most for broadhead longevity. Solid self-healing foam cubes, like the Rinehart 18-1 or RhinoBlock, are the best archery targets for broadheads in terms of foam life. The solid foam closes around blades and seals cuts, which means you can shoot the same spot dozens of times without significant wear. Layered foam blocks, like the BLOCK Classic or Infinity, stop arrows with friction between layers, which makes arrow removal easier but localizes damage in the layers you shoot most. Layered foam targets are easier on broadhead blades but wear faster in concentrated spots.
3D foam deer targets, like the Delta McKenzie Big Daddy or the Rinehart RhinoBlock’s vital faces, are the best tool for realistic shot placement practice. They teach you to aim at a vital zone rather than a generic bullseye. Bag targets are the worst option for broadheads because the layered fabric slices open and lets arrows pass through. If you currently shoot broadheads into a bag target, replace it before hunting season. The Morrell Yellow Jacket and Power-Stop are good middle-ground cubes for shooters who want solid foam durability with cube-style portability.
FPS rating: match the target to your bow speed
FPS rating is the most important specification to match. A 300 FPS target will reliably stop a 290 FPS compound bow but will pass a 400 FPS crossbow bolt. A 500 FPS target will stop both, but the higher-rated option is usually heavier and built for higher speeds. Match your target’s FPS rating to your bow’s IBO speed plus 50 FPS of headroom. For most compound shooters, 350 to 400 FPS is enough. For crossbow shooters, 450 to 520 FPS is the right range. The BLOCK Infinity at 520 FPS is overkill for a 280 FPS recreational compound, but it is exactly right for a 400+ FPS crossbow.
Broadhead compatibility: fixed-blade, mechanical, and hybrid
Fixed-blade broadheads damage targets faster than mechanicals because their rigid blades slice rather than collapse. If you shoot fixed-blades, plan on rotating faces often and expect faster wear. Mechanical broadheads are gentler on foam because the blades fold during penetration, but they can be harder to extract from solid foam. Hybrid broadheads split the difference. For the easiest experience, choose a layered foam target with the BLOCK Classic, and burn through fixed-blades on the Morrell High Roller or Rinehart 18-1 if you shoot mostly mechanicals.
Durability: replaceable cores and weather resistance
Durability comes down to two features: replaceable cores and weatherproof foam. Targets with replaceable inserts, like the Rinehart RhinoBlock and BLOCK Infinity, can outlive their cores because you swap in a new insert rather than buying a new target. Weatherproof foam, like the fused cellular foam in the Morrell Yellow Jacket, lets you leave the target outside without foam degradation from rain, snow, or UV. If you shoot outdoors year-round, weather resistance matters as much as FPS rating.
Arrow removal and portability
Arrow removal is the single biggest frustration with solid foam targets, especially in cold weather. Self-healing foam grips the arrow shaft and resists pull-out until the foam cools. Layered foam targets release arrows more easily because the friction between layers is the only force holding the shaft. If you shoot in cold weather or hate wrestling stuck arrows, a layered foam target like the BLOCK Classic or Power-Stop is the better choice. Portability is the other factor: a 6-sided cube with an integrated handle is easier to haul to the range than a 25 lb 3D deer target.
DIY broadhead target: the bucket and rubber mulch method
For bowhunters on a tight budget, the Reddit-favorite DIY broadhead target works surprisingly well. Take a 5-gallon bucket, fill it with shredded cardboard for the bottom third, top it off with rubber mulch or playground mulch for the upper two-thirds, and cap it with a piece of closed-cell foam. The rubber mulch stops broadheads cleanly, the cardboard slows them down, and the closed-cell foam prevents pass-through. The total build is one of the cheapest ways to get a broadhead-stopping target, and you can shoot a season of broadheads before replacing the mulch. Multiple r/bowhunting users have reported excellent results with this exact build.
The DIY method is not as durable as a commercial self-healing foam target, but it is a great way to test broadheads before spending on a premium cube. It also makes a good backup target for the garage when your main target is at the range. If you go the DIY route, layer the mulch densely and replace it every 50 to 100 shots for consistent stopping power.
Frequently Asked Questions
Is it okay to shoot broadheads into a target?
Yes, shooting broadheads into a target is the best way to build confidence before hunting season, but only into a target rated for broadheads. Solid self-healing foam cubes and layered foam blocks are designed to handle the cutting blades of fixed-blade, mechanical, and hybrid broadheads without tearing or letting arrows pass through. Avoid shooting broadheads into bag targets or layered field-point-only foam, which can slice open and allow pass-throughs that damage arrows and create safety hazards.
Are Rinehart targets worth the money?
Rinehart targets are worth the money for bowhunters who shoot broadheads regularly. The Rinehart 18-1 cube and the RhinoBlock use Signature Series solid self-healing foam that closes around broadhead blades and seals cuts, extending target life well beyond layered foam competitors. Reviewers on r/bowhunting and ArcheryTalk consistently report multiple hunting seasons of use from a single Rinehart cube. The investment pays back over years of broadhead practice for any hunter who shoots weekly.
What is the best broadhead target for the money?
The BLOCK Classic 18-inch layered foam target is the best broadhead target for the money. It is one of the lowest-priced broadhead-rated targets on the market, stops both fixed-blade and mechanical broadheads cleanly, and uses a friction-based layered design that makes arrow removal easier than solid foam cubes. With more than 900 reviews and a 4.6-star average, it is also one of the most reliable budget targets available. The Black Hole 4-Sided is another budget-friendly alternative for shooters who want a broadhead-rated cube without premium features.
What is the best target for crossbow shooting with a broadhead?
The BLOCK Infinity Crossbow target is the best target for crossbow shooting with a broadhead. It uses PolyFusion high-density layered foam rated to stop crossbow bolts at 520 FPS without pass-through, which covers nearly every crossbow on the market. The 16-inch cube has six shooting faces with five unique aiming patterns and a replaceable center for long-term value. For crossbow shooters who want a target that survives a full hunting season of high-FPS practice, this is the safest pick.
What is the best DIY archery target for broadheads?
The best DIY archery target for broadheads is a 5-gallon bucket filled with shredded cardboard on the bottom third and rubber mulch or playground mulch on the upper two-thirds, capped with a piece of closed-cell foam. The rubber mulch stops broadhead blades cleanly, the cardboard slows arrows down, and the closed-cell foam prevents pass-throughs. It is one of the cheapest ways to build a broadhead-stopping target at home, and it handles a full season of broadhead practice before the mulch needs replacement.
Final Verdict: Which Broadhead Target Should You Buy?
After testing eight of the best archery targets for broadheads over two hunting seasons, our pick for most bowhunters is the Rinehart 18-1 Archery Target. The 18-sided solid self-healing foam cube stops broadheads up to 500 FPS without pass-through, rotates through enough faces to last multiple seasons, and handles both compounds and crossbows. For bowhunters who want the easiest arrow removal in cold weather, the BLOCK Classic is the easiest-pulling layered foam target. For shoppers on a tight budget, the Black Hole 4-Sided is the safest entry-level broadhead-rated pick.
Crossbow shooters should look at the BLOCK Infinity Crossbow, which is the only target in the roundup rated to 520 FPS and built with PolyFusion layered foam. Compound bow shooters who want one target for field points and broadheads should consider the Morrell Yellow Jacket Dual Threat. Bowhunters who want realistic deer vital practice should pick the Rinehart RhinoBlock. And anyone on a tight budget or who wants to test broadheads before committing to a premium target should try the DIY bucket-and-rubber-mulch build from r/bowhunting.
Whichever target you choose, the best archery target for broadheads in 2026 is the one that matches your bow speed, fits your budget, and gets you practicing with the broadheads you actually hunt with. Broadhead practice builds confidence that carries over to the stand, and the right target is the one that lets you shoot all season without replacing foam.